BIM is a digital transformation in the Architecture, Engineering and Construction industry. BIM is a process which allows construction professionals to plan design and construct 3D model of a structure. BIM software is 3D design and modelling software that can help optimize the work of designing for architecture, structural and (MEP) Mechanical Electrical and Plumbing.
- BIM helps to make better design decisions to improve building performance.
- Collecting information from a construction site and connecting information from construction through handover.
- Handling the design and structure of piping, structures, and procedures.
- It Improves predictability, productivity, and profitability of work.
- Supporting project delivery which success and improved design quality and collaboration.
HOW DOES BIM PROCESS WORK?
A building information model can be use throughout a project lifecycle to bring clarity and efficiency into a particular structure’s construction. The process of BIM includes four steps:
- Planning: BIM software can apprise, guide, and simplify a project planning by allowing its users to use reality capture in an everyday data to understand how a building or a structure will look in its natural atmosphere.
- Design: Design phase can be the most complex part of any construction process, requiring of conceptual design and its analysis. BIM can provide comprehensive modelling that can organize construction and also provide a crucial information about its design’s performance.
- Built: BIM project conditions and shared documents can largely guide and simplify fabrication through this phase.
- Operating: Carrying data from BIM to operations and maintenance to be used later for renovations or deconstructions of that particular structure.
THE BENEFITS OF BIM COORDINATION.
BIM helps two main parties that are heavily benefitting of BIM coordination into its construction process which are engineers and architects.
- Easily locate the design errors which could cost a lot of money to fix in the final project state.
- Clash detection with Revit of Navisworks is capable of greatly reducing the number of changes that would happen in the construction process if the clashes not detected sooner.
- Real time construction preparation is also one of the byproducts of 3D BIM management and widespread 3D reports.
- BIM coordination makes easier to collaborate between different departments such as architects & engineers.
- Manifold engineers can work on combined model that would reflect every change from each and every one.
- Supplementary design modifications and improvements are possible appreciations to the detailed mapping.
BIM CO-ORDINATION WITH ARCHITECTURAL, STRUCTURAL & MEP.
BIM’s significance is the same to Structural, Architectural & MEP engineers. BIM process is valuable to architects, it will also be equally beneficial the fields like structural and MEP engineers. The
features in the BIM tools they use, or sometimes the BIM tools themselves may differ for the 3 fields of the AEC (Architecture, Engineering and Construction) industry.
BIM is substantial to architects, structural and MEP engineers in the following ways:
- It allows for spotless communication between the project investors (architects, engineers, clients, contractors, projects managers and construction workers).
- It Cuts project time and costs dramatically and increases productivity among construction workers.
- Help makes AEC professionals take informed decisions by helping them analyse and simulate the data embedded in the BIM models.
- Gives room for integration with systems like GIS, Big Data and Cloud Computing.
- Supports to improve current design system and optimise them for better plan management.
- Assistances in the workable development process by supporting the use of sustainable skills.
- Reduces construction dangers and risks by early clash detection and review of the project through its ‘cardinal twin.
INTRODUCTION TO NAVISWORKS
Autodesk has been around for a while now and has traditional itself as one of the top BIM/CAD software providers on the marketplace. There are adequately of different Autodesk solutions right now, each with its use event and a target audience, but the one we’ll be looking at the most is Navisworks.
Navisworks was created by Sheffield,UK based developer Navisworks it was subordinate to Lightworkdesign. Navisworks was purchased by Autodesk for $25Million on 1st June 2007.
FUNCTIONS OF NAVISWORKS
Navisworks is a very suitable software tool in piping design engineering. It also allows users to open, view, and combine 3D design models. Navisworks gives you a real 3D model feel of the structure in its design stage. Navisworks users can easily steer around the plant in real time and perform several activities like commenting, redlining, measuring, creating viewpoints & so on.
FIVE WORKFLOW OF NAVIS WORKS.
- Clash Detection To confirm another level of project security with the capability to construct your project digitally so you can organize and resolve possible problems before you build on position.
- Comparison of multiple inputs With Clash Detection you can conduct clash tests between old-style 3D geometry (trios), and laser-scanned point clouds, so you can compare your tactics with onsite authenticity capture and adjust as necessary.
- Spot hitches from moving objects You can link Clash Investigator tools to Object Animations to enable you to automatically check interferences between moving objects.
- Understand clashes across time By involving Clash Detective and Time Liner together, you can run time-based clash checks on the project.
- Model Aggregation Create a single, multidisciplinary understanding of all of your construction model information that everyone can review.
- Assistance from broad compatibility Navisworks wires more than sixty different third- party applications as well as AutoCAD and Revit, so you can easily open and syndicate different prototypical file types from across the construction structure.
- Get a assessment of the project since start to finish Navisworks combines the whole construction project data set. When collected, the files carry together geometry and
data formed by multi-disciplinary crews and enable you to see and review complex models in real time.
- Simplify easy reviewing With Navisworks, you can create and allocate a single file with a whole-project view of the prototype modal, providing equivalent access for everyone across the team to sightsee and review.
- Simulation & Animation Animate and interact with items to give a more precise view of the model, with simulations.
- Emphasis on the specific details you want Inside your simulations, you can connect a object and viewpoint animations to your structure plans, so you can get a broad
indication, or zoom in on a specific area or object to see more in detail.
- Animate what you want can enhance animation to an complete list, or just to specific tasks depending on what you need to review.
- Create flexible picturing You can add writings to the tasks in your schedule to increase more control over the belongings of each animation.
- Venture new time and cost Explore time and cost consequences for unlike possibilities by adding overlays to simulations with 5D animation functionality across assembly, process and dismantling.
- Quantification Produce a extra correct view of material numbers and measurements from both 2D and 3D documents.
- Complete large-scale take off rapidly Quantification allows you to take a look of an entire building information model (BIM) and create coordinated project views that syndicate
information from BIM gears such as Revit® and AutoCAD® software composed with geometry, pictures, and data from other tools.
- Take control of project informs Take updates have never been easier to achieve than with Quantification. When changes are made to any essentials of the model, all numbers are automatically updated then recalculated within the single, multidisciplinary model opinion.
- Estimation missing data If you want to estimate measurements for items with no allied model geometry or properties, you use Quantification to perform a virtual take off and complete your model info.
- Integration with BIM 360 Access models in the cloud anywhere you are through simple mixing by BIM 360 Glue.
- Stopover clashes before they happen By using BIM 360 Glue in parallel with Navisworks, you can decrease the amount of time consumed manually sorting through clash.
- Share and edit easily across teams Integration allows handlers to share data and workflows by any project already using BIM 360, so you can edit your models in
Navisworks and save them straight back in BIM 360 for additional team members to access.